• Low cost due to high volume manufacturing and vertical integration
• Superior quality, manufacturing facility is certified to ISO 9000 standards
• Brushless DC motors with locked rotor protection and auto-restart feature
• Dual, pre-loaded NMB shielded ball bearings for long life
• Low noise impeller design
• Durable lightweight engineered plastics designed to reduce noise
• Non-flammable material, UL94V-O
• Designed and manufactured to meet UL, CSA, VDE, and TUV safety standards
• Alarm and speed sensor options available for DC fans
• Temperature sensing, variable speed, & 2-Speed options available for DC fans

Installation Method:
For either the suction or exhaust type, horizontal, vertical or inclined installation can be selected.

Protection:
Motor burnout is prevented by the impedence system or thermal protection system, thus safety
is always insured.

Impedance System:
The fixed impedance of the coil keeps the specified temperature below that specified by the
insulation class of the motor coil.

Thermal Protection System:
The coil includes a bimetallic strip to control the connection switch. This operates to keep the
temperature below the specified insulation class.

Notes:
Additional performance requirements can be determined between manufacturer and customer, based on customer’s request.

	Vibration Test:		JIS C0040 Amplitude 1.5mm, Frequency 10 - 55Hz, 1 hr per axis: X, Z, Y
	Shock Test:		JIS C0041 Acceleration 981 m/s2, Duration 6ms per axis: X, Z, Y Note: 1004KL, 1204KL, 1404KL, 1604KL, 1606KL, 1608KL, 2004KL, 2106KL, 2404KL, BM4515, BM5115, BM5125 and BM 6015 Series: Acceleration 500 m/s2, Duration 11ms per axis: X, Y, Z
	Noise:		Measured at rated voltage, 1 meter distance in an Anechoic chamber, back ground noise 16dBA Max.
	Insulation Class:		E Class (UL: Class A)
	Motor Structure:		Brushless Motor (BLDC)
	Insulation Resistance:		10 Mohm Min. @ DC 500V
	Dielectric Withstand Voltage:		AC700V for 1 sec. (< 0.5mA allowable, between lead and frame)

Installation Method:
For either the suction or exhaust type, horizontal, vertical or inclined installation can be selected.

Protection:
Motor burnout is prevented by locked rotor protection/automatic restart and polarity, thus safety is always insured.

Notes:
Additional performance requirements can be determined between manufacturer and customer, based on customer’s request. Wire gauge of AWG24 is standard. If a third lead wire is required AWG26 lead wire will be used.